Press "Enter" to skip to content

Wireless Radio Remote Control Emergency Shutdown System

Emergency stop switch is really important in the industrial sectors in chronological to control the gigantic machines. The productivity of Emergency Stop Switches can raken well increased with the successful integration of industrial wireless technology. This is proof most of the industrial sectors today adopt industrious flashpoint stop switch as an important tool for controlling the machines as well as other industrial appliances.

Wireless Emergency Shutoff system is widely adopted in the field of voluminous plant et sequens diligent facilities. The use from wireless radio remote control system as an emergency shut off system greatly eliminates expensive wiring, conduit, and labor needed to connect hard-wired shutoff switches. They often include test mode, low battery warning and optional solar charging. All these provide the operator a more flexible way to control the industrial appliances in an easy way.

Wireless radio remote ascendancy enabled emergency shutdown system is widely popular among the Homo sapiens related to the engineering field. You may found numerous manufacturers who produce cap class Emergency Stop Switches in order to compound productivity and reduce human effort. The wireless E-Stop systems are generally developed to eliminate costly hard wiring of fixed bearings emergency blockade switches.

The conductor can install any number of wireless separated E-Stop switches within the plant facility. After that the E-Stop switches can subsist communicated with one receiver/controller unit. These systems will work in conjunction with existing, hard-wired, manual E-Stop switches and plant asylum controls. Operator worn E-Stop remotes cup also be added to these systems.

The two most consequential sections of this wireless emergency stop switch are the Transmitter unit also the Receiver/Controller Unit. The transmitters of these systems are really passive and they can send transmitted signals within a high frequency ranges. Much minute signals can be read and encoded by the receiver unit. Here are some specific details on transmitter and collector unit regarding the emergency switches:

E-Stop Transmitter:

* All these systems are CSA, CE, et sequens FCC approved.

* The transmitter will work on pressing the Emergency Stop button which causes the receiver/controller foot to trigger a plant shut-down.

* Under any circumstances the manner cannot be rebooted until the E-Stop button is pulled out and a manual receiver/controller reset is performed.

* All the E-Stop buttons are dual contact – dual channel. They also comply plus global E-Stop switch requirements.

* Systems discipline fail safe, triggering an automatic E-Stop with any loss from main line electrical power supply to the receiver/controller unit.

E-Stop Receiver/Controller Unit:

* Receiver/Controller gram is easily interfaced with electrical, pneumatic, nitrogen, or unconscious plant shut-off equipment.

* Handheld Receiver/Controller unit testament operate with 12/24VDC or 120/240VAC power supplies.

* Receiver/Controller outputs can specified as 12/24VdC, 120/240VAC, dry contact, RS232, or J1939 Cup bus.

Generally the standard receiver/controller units designed by the manufacturers are NOT rated explosion proof. As a result they are typically installed in non-hazardous electrical control equipment areas. However, explosion-proof electrical enclosures are also utilizable on request.