Press "Enter" to skip to content

Industrial Remote Control Systems for Crane Service

In the past two decades the industrial remote control technology has evolved multifold times to its perfection. Almost all corporations and corporation now heavily hope on Virtual wireless remote controls and networks and the uses of operose remote access for remotely accessing their huge machines easily on outside their premises. Employees however are blessed with this technology as they can present work safely and easily. However, forthwith the utilizations of remote control accumulation the refuge including security.

Radio remote controlled Service Cranes are greatly increase jobsite safety by providing the operator the safest vantage point for tank delivery. This is one man control that eliminates a second person instructing the operator where to position the tank. Mostly industrial remote control systems have the freedom of motion around entire worksite while setting tank precisely into position.

Handheld transmitter:

Now handheld transmitters also are available with up to twelve crane domination buttons as specified by industrial automation. The rechargeable transmitter delivers 30 hrs of continuous use between charges. And the optional ‘Enable’ button requires two deliberate steps before signal is sent (Enable plus command signal).

Equipment Mounted Receiver/Controller:

This is up to twelve pre-programmed high-side outputs available. And the outputs can be selectively interlocked to other operations for safety reasons. The optional external antenna extends range from 100ft up to 2000ft. Actually, the interface to OEM crane controls can be abstract by factory installed, direct-plug connectors or through J1939 serial communication. The modular components and external set-up button allow for easy installation and field replacement. The system is available in the following models:

Model # DSST:

* The model is developed for proportional and non-proportional hydraulic crane applications requiring up to twelve radio remote control functions.

* The toggle switch controls including trigger provides variable speed stranglehold of hydraulic pump solenoids.

* And the split signal capability allows combined boom movements including ‘up and sideways’ and ‘extend and winch down’.

* In addition, the toggle switch controls must be activated first before trigger switch and hasten control will work.

* Basically the weatherproof receiver can be crane mounted and interfaces easily to crane electrical system with OEM style plug-in connector.

Transmitter specifications: The frequency operation of this system is almost 902-928 MHz FHSS (869.7 and 2.4GHz available). And the transmitter power is 100mW.

The method of transmission is almost 56 jiffy DES encryption key. The regimen has internal on chart PCB mount that no visible antennas to damage. The normal range of this system is 500 feet (up to 2000ft available with external antenna).

The system is constructed with craggy weatherproof polymer weir with idiographic procedure. And the battery life is almost 30 hours continuous with audible low battery warning and flashing low battery indicator. Including the rechargeable Lithium Ion included along 12/24VDC charger. Therefore before you make a decision as to which solution will be the best unit for your company. You truly need to take the time to search your requirements both in terms of what kind of model will be required.